NuWaves' Low Noise Amplifier

HILNA™: HIGH INTERCEPT LOW NOISE AMPLIFIER High Linearity Wide-Band LNA
HILNA V1: 50 MHz to 1000 MHz

NuWaves’ HILNA^™ family of amplifiers are designed to achieve extremely low noise and high third order intercept point along with high gain. These characteristics are maintained across a wide band starting as low as 50 MHz and up to 5 GHz.
HILNA^™ Detailed Specification Data Sheet in PDF
HILNA-V1 Marketing Sheet in PDF
ON-LINE REQUEST FOR QUOTE

HILNA V1 Operating Characteristics:

Applications are many and include:

Frequency 50 – 1000 MHz
- Ultra Low Noise Applications

- LNA for Cellular Base Stations

- High Linearity Applications

- General Purpose Amplification

- High Performance Receivers

- Military Radios

- RF Pre-amplification

- RF Wideband Front-Ends

- Evaluation and Test Setups

- University Research and Instruction

- Low Level Signal Amplification

- RF Signal Distribution Amplifiers

- Multi-Signal Environment Amplifier

- Increase Link Margin in Radio Systems

- Test and Measurement

- Engineering Laboratories

- UAV Platforms

- RF Repeater

RF Gain:                   100 MHz

500 MHz

1 GHz

22 dB Typical

21 dB Typical

19 dB Typical

Reverse Isolation 27 dB Typical

Input / Output Impedance
50 Ω

Noise Figure:              100 MHz

500 MHz

1 GHz

0.80 dB Typical

0.75 dB Typical

0.95 dB Typical

OIP3 +32 dBm Typical

P1dB +18 dBm Typical

Operating Voltage 5 – 20 Volts DC

Current 70 mA Typical

Specifications Subject To Change Without Notice.

FEATURES

BENEFITS

- Extremely Low Noise and High Gain

- High Intercept Point

- Wide Dynamic Range

- Internal Regulator / Active Bias

- Reverse Voltage Protection

- Wide Operational Voltage Range

- Flange Mount Available

- Fully Characterized Assembly

- Ruggedized Assembly

- Low Cost

- Highly Reliable

- Multi-Octave Frequency Coverage

- Military Screening Available

- Superior Customer Support

The HILNA™ V1 is a COTS module. The module includes options with or without mounting flanges. Pricing for the V1 starts at $175.00 each (in quantities of 50). Power Interface Cable included. Contact Sales at 513-360-0800 or use our FAX Order Form to place your order.

ON-LINE REQUEST FOR QUOTE

Future versions include frequency coverage extending above 5 GHz (V2 and V3 models). Custom solutions are available with extremely short lead times.

HILNA CF: High Performance Low Noise Amplifier with Client Specified Custom Filtering

HILNA G2V1: High Performance Low Noise Amplifier with 40 dB of Gain (50 MHz to 1 GHz)

HILNA GPS: High Performance Low Noise Amplifier for GPS L1 and L2 Band (32 dB of Gain)

uHILNA: Micro High Performance Low Noise Amplifier

Last updated: 08/27/08

© NuWaves Ltd., 2003 - 2008, All Rights Reserved.