The RF200-2500RV1 ConvertaWave2^TM Down-Converter provides high dynamic range performance over the entire 200MHz to 2.5GHz frequency range, in frequency steps of 1 Hz.  The output of the receiver is a 70 MHz spectrum that has been band-limited to one of five user selectable bandwidths between 500kHz and 10MHz. The ConvertaWave2^TM provides low LO phase noise as well as both manual and automatic gain control (MGC/AGC) with over 100 dB of attenuation in 1dB increments.  The ConvertaWave2^TM meets the demanding need for high performance RF receivers for applications involving signal exploitation, inclusive of SIGINT, COMINT, ELINT and RF down conversion for intercept receivers.

ADDITIONAL FEATURES:

• Simple User Interface Control

• Evaluation Kits Available

• Small Form Factor: 7.0" x 4.0" x 1.35" (L x W x H)

• Sleep Mode

• 12 VDC Operation

• Simple RS-232 Interface

• Triple Cascade Varactor Tuned Filters (Superior Rejection of Out-of-Band Signals)

• Processor Controlled Downconverter

• Configuration Storage

• Custom Solutions (Modifications to Your Specifications)

APPLICATIONS:

• RF Down-conversion

• RF Signal Receivers

• RF Front-end for Tactical Receivers

• Software Defined Radios

• Test Bed Developments

• RF Tuner with IF

• Programmable RF Frequency Conversion

• Waveform Receivers

RF200-2500RV1 ConvertaWave2™ RF Downconverter Sales Sheet

RF200-2500RV1 ConvertaWave2™ RF Downconverter Specification

For additional information on the ConvertaWave2^TM email our technical solutions department or contact sales.

 Related:

RF22-52DCV1: RF Down-Converter (ConvertaWave^TM)

RF200-2500TUNV1: High Performance RF Tuner (HiPerTUNER™)

RF2-3000UCV1: Multi-Octave RF Upconverter (MORF™)